PRO-WIND-13
Highlighted Points:
- High speed fully servo driven automatic turret rewinder
- Glue less turret rewinding
- Automatic core loading system
- High speed rewinding up to 175 M/min
- No need to change tool while changing core size
- Fully automatic HMI control
- Extra-large unwind up to 1 meter diameter
- Stand alone or sync with another machine possible
- Push button core shaft replacement
- Toolless technology
- Modular unit to add or remove additional print/die cut unit
- Inline slitting with auto engage/disengage technology
- Slide out slitting unit without tearing the web
Landscapes:
- The PRO-WIND Series offers modular design enabling multiple configuration possibilities
- Machine operates through a direct servo driving system
- Advanced PLC compatible system for automated tension control via direct drives.
- Modular design enabling ease of adding modules to suit individual requirements.
- Die and print stations each individually servo driven
- Servo nip drives for precise tension adjustment and isolation during die cutting process.
- Servo nip drives for precise tension adjustment and isolation during die cutting process.
- Driven waste rewind with adjustable tension strip assist system.
- Driven rotary shear slitting system as standard.
- Driven rotary shear slitting system as standard.
- Slide out slitting unit without tearing the paper
- Slitting blasé engage and disengage pneumatically operated
- Core sizes possible - 25mm to 76mm.
- Core sizes possible - 25mm to 76mm.
- Automated material reel tail closure via label
- Accurate, repeatable, digital tension control with servo driven nip for
- tension isolation between unwind and rewind settings.
- Unwind unit with splice tables. Length (meters or feet) and label count control.
- 10" color HMI operator touch screen control.
- 10" color HMI operator touch screen control.
- Pneumatic unwind reel lift - Available on all type unwinds within PRO-WIND Series
- Waste rewind Lay on roller – Pneumatically loaded/adjusted to suit matrix requirement. Edge trim removal - High-speed VENTURI pneumatic systems
- Re-Registration System - To allow for pre-printed materials to be cut to register mark.
- Back scoring device - To cut backing material edge to wind edge trim into waste wind.
Optional Possibilities
- Air assisted turner bar - Fully adjustable to suit web width to enable inside winding.
- Laminating Station - Driven unwind to laminate materials prior to die cutting.
- Web paths modified/extended for use of inspection requirement.
- Various Missing Label Detection Systems for paper and/or film labels
- Flag and splice detection systems.
- Die tool and Anvil changeover – electric crane to load or unload the tools
- Automated material reel tail closure label digital print head
TECHNICAL SPECIFICATION
| PARTICULAR | PROWIND -330 | PROWIND -450 | PROWIND -560 |
|---|---|---|---|
Maximum web width | 330mm (13”) | 450mm (16”) | 510mm (20”) |
Maximum unwind diameter | 800mm (32”) | 1000mm (40”) | 1000mm (40”) |
Turret Rewind diameter | 250mm (10”) | 250mm (10”) | 250mm (10”) |
Material rewind diameter | 700mm (27.5”) | ||
Waste matrix diameter | 600mm (24”) | ||
Maximum operating speed | 175 meter/min | 150 meter/min | 150 meter/min |
Material to be run | Paper, film & ps material (die cut labels) | ||
Thickness of material | 40 micron to 250 micron | ||
Operating concept | Direct servo driven | ||
Slitting concept | Rotary shear blade slitting | ||
Core loading | Automatic | ||
Core size | 1”-3” core id | ||
Turret setting | Automatic by servo (control in HMI | ||